Here we discuss How to Root and Install TWRP Recovery on Coolpad Note 3 Lite. Recently Coolpad Note 3 Lite gets the Marshmallow Beta update, and many users are looking for a method to root Coolpad Note 3 Lite and install TWRP recovery on it. Those who have upgraded their devices to the latest Marshmallow firmware and are looking for a root method can follow our step-by-step guide to Root and Install TWRP Recovery on Coolpad Note 3 Lite Marshmallow.
After flashing TWRP Recovery on Coolpad Note 3 Lite, you can install custom ROMs, flash a custom kernel, take nandroid backup, install rooted apps and flash supersu to root Coolpad Note 3 Lite. Installing a custom recovery on Coolpad Note 3 Lite will wipe the stock recovery and replace it with a new one. Follow below steps to Root and Install TWRP Recovery on Coolpad Note 3 Lite on Marshmallow.
To Root and Install TWRP Recovery on Coolpad Note 3 Lite all you need is SP Flash Tool, Scatter file, and Recovery file. All you have to do is place the scatter file and recovery file on Sp Flash Tool folder and flash it. You can check below steps to Root and Install TWRP Recovery on Coolpad Note 3 Lite.
About Device – Coolpad Note 3 Lite sports 5-inch IPS LCD capacitive display with a resolution of 720 x 1280 pixels. The device powered with 1.3Ghz Quad Core Mediatek MT6735 Processor 3GB of RAM. It has 16GB internal memory (expandable up to 32GB) and has 13MP back and 5MP front camera. The device is good enough root and install custom ROM in it. So Root and Install TWRP Recovery on Coolpad Note 3 Lite to explore the power of your device.
Before You Begin
- This method is only for Coolpad Note 3 Lite. Don’t try this on any other device.
- Follow the steps correctly otherwise, you may brick your device. We Guidegeekz.com is not responsible for any damage to your phone.
- Charge your device to60- 70% to prevent it for accidental shutdown.
- Take a complete backup of everything important.
Necessary Downloads
- Download SP Flash Tool
- Download TWRP Recovery for Coolpad Note 3 Lite
- Download Scatter file for Coolpad Note 3 Lite
- Download SuperSU to Root Coolpad Note 3 Lite
How to Root and Install TWRP Recovery on Coolpad Note 3 Lite
Flash TWRP Recovery on CN3 Lite
1) Download the latest SP Flash Tool from above and extract it on your PC.
2) Download the Scatter file and TWRP Recovery (rename it to recovery.img) and save it on Sp flash Tool folder.
3) Now open flash_tool.exe as an administrator.
4) Click on the Download Tab the click on the scatter-loading button.
5) Now select the Scatter-loading file.
6) Click on the Download button and make sure only Recovery option is checked.
7) Now turn off your device and connect it to your PC via USB Cable with your phone with the battery in it.
8)Â Press Volume Down or Volume Up key, so that your PCÂ detect your Device.
9)Â Once the Firmware Flashing process completes, a Green Ring will appear.
10) Done. Now disconnect your device and Press Volume up and Power button till recovery comes on the screen. (This is important don’t reboot your device directly)
11) You can also check the detailed Flashing guide with images from here – Flash TWRP on CN3 Lite
Root CN3 Lite
1) First, boot your device into TWRP Recovery by pressing Volume up + Power button simultaneously.
2) Now click on Install button and select supersu to root Coolpad Note 3 lite.
3) Swipe to flash supersu.
4) Done! You successfully Root Coolpad Note 3 Lite.
This is the complete guide to Root and Install TWRP Recovery on Coolpad Note 3 Lite. If you have any question related to this post, feel free to leave that in the comment section.